GAME SHOW 8 Station Quiz System www.szikla.com Speaker Emits audible tone when a Contestant Button is pressed. Period, Frequency and Volume are adjustable via the Front Panel Audio Controls. Volume can be adjusted to zero. First In Indicators 5mm LEDs light up individually to indicate which Contestant Station has delivered the first Button press in the current round. Contestant Station Inputs / Outputs Connect to up to 8 x Contestant Stations via 3 pin XLR cables. Pin 2 carries 12VDC. Pin 3 carries the Button return. Pin 1 switches the Audience Lamps on. Audio Controls Unit emits audible tone when a Contestant Button is pressed. Period, Frequency and Speaker Volume are all independently adjustable. This tone is also output via the Rear Panel XLR for injection into a P.A. system. XLR output is pre-fade, and not affected by the Speaker Volume knob. Lamps Fuse Protects relays which switch the Audience Lamps via XLR Pin 1. Ready / Reset Button Press to reset system, ready for next question. Switch illuminates green to indicate system is ready. Pressing this switch also extinguishes all Contestant Station LEDs, Audience Lamps and First In Indicator LEDs. XLR Audio Output Inject pre-fade balanced audio tone into P.A. system at -10dBu. Unaffected by Speaker Volume knob. GAME SHOW 8 Station Quiz System www.szikla.com Contestant Button Large 60mm diameter heavy duty button is designed to take a pounding ! Aluminium Enclosure Die cast and powdercoated black. Audience Lamp Large 70mm lamp glows to indicate which Contestant Station has delivered the first Button press. (faces audience) XLR Input /Output Located on front of unit, the XLR cable can then be neatly dressed via the front of the table, to match the dress of microphone cables etc. Can be located anywhere else via special order. Contestant Confidence LED 10mm LED glows to indicate which Contestant Station has delivered the first Button press. (faces contestant) Rubber Base Helps absorb shock and discourage sliding. GAME SHOW 8 Station Quiz System www.szikla.com GAME SHOW GS8 − SIMPLIFIED WIRING CONNECTION SCHEME MASTER CONTROLLER +12VDC CONTESTANT STATION STANDARD XLR CABLE SUPPLY RAIL XLR 1-8 2 2 MXLR +12V +12VDC / O125mA +12VDC (COMMON) BUTTON RETURN 3 BUTTON RETURN FXLR Button LAMP RETURN +12V 150R/1W 3 LAMP RELAY SWITCH 1 XLR1-8 To Contestant Station LOGIC (PER CHANNEL) (PER CHANNEL) 1 DO NOT GROUND PIN 1 IS NOT GROUND ! Normally Open RED LED 1-8 Front Panel LAMPS FUSE XLR 1-8 1A SLOW LAMP FUSE RAIL SYSTEM GROUND Avoid Connecting XLR Pin 1 to Ground (via common-grounded patch panels etc) even though it is perfectly safe to do so. In the event that this happens, the Audience and Contestant Lamps will turn on indefinitely, as the relays are bypassed in such a configuration. XLR Pin 1 is a return switching line, and not a ground. 470R 10mm RED LED in Bezel (Faces Contestant) 40mA RELAY1-8 Lamp SWITCH N/O MOM AUDIENCE LAMP 12V / 20mA
© Copyright 2026 Paperzz