STAINLESS
STEEL
Solutions
STAINLESS
STEEL
CLEANER
Cyndan Stainless Steel Cleaner is a Heavy
Duty cleaner specifically formulated to remove
staining & corrosion as well as passivation
common to stainless steel surfaces exposed
to the elements. It chemically brightens the
surface to a ‘like new’ state.
Great for use on balustrading, commercial
kitchens, tanks and any stainless steel surface.
It is highly recommended that following the
cleaning of the surface with Stainless Steel
Cleaner, you follow with an application of
Stainless Steel Sentry or Stainless Steel Polish
to seal and protect the Stainless Steel from
further corrosion.
Removes Staining
USE ON:
• Balustrading
• Railings
• Commercial
Kitchens
• Tanks
• All Stainless
Steel Surfaces
Removes Corrosion
Brightens Finish
STAINLESS
STEEL
POLISH
Cyndan Stainless Steel Polish contains
a unique blend of ingredients for the total
maintenance of all grades of polished stainless
steel and aluminium.
It removes watermarks, finger smudges and
conceals surface scratches. Once applied it
forms a protective monomolecular coating
which repels water, soiling, chemical attack
and adhesion.
This protective coating preserves the
surface against deterioration, enhances the
appearance with a lasting gloss and eases
future cleaning. Ideal for lift doors, fridges,
automotive and marine fittings.
Removes watermarks
BENEFITS:
• Prevents tea staining
• Protects handrails from
air borne contamination
• Leaves a non-oily
surface
• It does not attract dust
• Certificate of approval
to be used in and
around kitchen areas
• Can be used on all
grades and finishes of
Stainless Steel surfaces
Removes finger smudges
Conceals surface scratches
INTERNAL AND EXTERNAL
STAINLESS STEEL STRUCTURES
MAINTENANCE PROCEDURE
For Stainless Steel Fabricators
and Commercial Businesses
1. In the event of heavy inclement or cyclonic weather conditions or should
there be a heavy build up of salt water, sand, grime, tea staining/ rust
markings, all Stainless Steel Structures should be cleaned down with
Cyndan’s Stainless Steel Cleaner with a solution of 1 part product to 12
parts water. This solution is to be SPRAYED onto the surface (wearing
gloves recommended), allow to sit for 8-10 minutes, then wash off with
water. Allow to dry completely. Once surface is dry, re-apply a liberal
coating of Cyndan’s Stainless Steel Polish or Sentry (instruction as noted
above).
2. All Stainless Steel Structures/Fixtures may be maintained by using either
Cyndan’s Stainless Steel Polish or Sentry.
NOTE:
3. Should Staining (rust markings) become more visible (e.g. to remove rust
and salt oxidising marks) a stronger solution of 1 part product to 6-8 parts
water, depending on the severity of Staining, should be applied. Allow to
sit for 8-10 minutes, wash off with water and reapply Cyndan’s Stainless
Steel Polish or Sentry as noted above. Severe stainning may require soft
agitation prior to washing off with water.
4. Protection of floor/wall surfaces while spraying Cyndan’s Stainless Steel
Cleaner should be considered (use, clean, dry clothes to catch overspray/
droplets).
Stainless Steel REJUVENATING KIT
This kit contains two products formulated
especially for restoring & protection of Stainless
Steel:
• Stainless Steel Rejuvenating Paste
Step 1, The Rejuvenation Preparation
• Stainless Steel Sentry
Step 2. The Protecting Coating
Stainless Steel of any grade is subject to
corrosion and “tea staining”, this can now be
eradicated.
Restores & Protects
Kit treats up to 10sqm
Protects for months
STAINLESS STEEL
REJUVENATING PASTE
This formulation is prepared for the removal of corrosion and ‘tea staining’ on
all grades of stainless steel whether internal or external.
This non abrasive formula not only cleans and removes the contaminates,
it pre conditions the stainless steel for the protective treatment of Cyndan
Stainless Steel Sentry. This formulation is pH balanced in order to counter
any acidic corrosive residues remaining from previous cleaning products and
contaminates. This pH balancing aids in the protection of further ‘tea staining’
and corrosion.
This product is designed to be used only in conjunction with Cyndan
Stainless Steel Sentry.
STAINLESS STEEL
SENTRY
For all grades of marine and architectural, internal and external Stainless Steel.
Containing the Ultra protection concentrate Cyndan NANOLON.
Cyndan Stainless Steel Sentry is the second step to the conditioning
and ultimate protection of your Stainless Steel. The Cyndan NANOLON
concentrate when applied to the preconditioned stainless steel microscopically
coats it and protects it for several months depending on the conditions.
The Cyndan NANOLON concentrate protects stainless steel from
atmospheric corrosion which causes unsightly ‘tea staining’ and rusting.
This product is designed to be used only in conjunction with Cyndan
Stainless Steel Rejuvenating Paste.
TESTIMONIALS
BELL STAINLESS
Cyndan Stainless Steel Cleaner has been formulated to effectively clean
stainless using a combination of phosphoric acid and ammonium biflouride,
providing thorough and deep cleansing of not only grime, mineral salts, leaching,
oxidation and other stains, but most importantly Tea Staining. Once the cleaner
is neutralised the next step is to apply Cyndan Stainless Steel Sentry - a
protective coating that keeps stainless steel looking great for months, even in
harsh coastal environments. It also helps to prevent future soiling by the creation
of a water repellant film which reduces corrosive buildup of salts, etc.
As a company we’ve found Cyndan’s products and processes to be time
effective, manageable and safe to use, while providing longevity to the
appearance and structure of stainless steel. We have no hesitation in
recommending Cyndan products, and are pleased to be associated with
another company who takes their work as seriously as we do.
David Vine
General Manager - Bell Stainless
D&R STAINLESS
For some years now, we have enjoyed the benefits of your Stainless Steel
Cleaner to remove weld burn marks when we are fabricating in Stainless Steel.
If you are not aware, this is a real problem.
We are very happy with the results we get when we use your product. It is
very easy to use and has little to no fumes compared to other products on the
market which are nasty to use and very fumy.
In addition, the fact that we can dilute the product confirms that it is a true
concentrate and provides us not only with a product that gets the results
we want it doesn’t cost and arm and a leg. I appreciate your service to our
company.
Karl Manders
D&R Stainless
DISTRIBUTOR
Before
After
The commercial kitchen storage cabinet featured in the above pictures show our
Stainless Steel Cleaner before & after using the product.
www.cyndan.com.au
vironment
A responsible choice
Our aim is to achieve total customer satisfaction by providing chemical solutions.
The key is in formulating a favourable balance between the following four
important elements.
economy
results
safety
safety
environment
environment
economy
results
economy
results
safety
environment
RESULTS
ENVIRONMENT
ECONOMY
SAFETY
An important element of
our customer satisfaction
is based on the consistant
and favourable results
of our products. Our
company motto is “chemical
solutions”, therefore our
products are formulated to
primarily provide ‘solutions’
to industrial requirements.
At Cyndan, we are very
conscious of our impact on
the environment.
Our products and
formulations are regularly
updated to incorporate
the latest and most
environmentally friendly
raw materials. We have a
growing dedicated ‘green’
range of chemical products
and also specialised
coatings that help reduce
maintenance thus assisting
companies to minimise their
carbon footprint.
We recognise that our
customer has ready access
to water, therefore we offer
only true concentrates,
providing maximum
economy.
This also saves our
customers on packaging
and shipping costs.
Safety is paramount to
our Cyndan philosophy,
both for our staff and for
the users of our products.
Our warehouse and
manufacturing facilities
are constantly updated to
exceed safety regulation
and standards.
Our products are formulated
to incorporate non-toxic,
non-caustic and nonflammable, user friendly raw
materials wherever possible.
We can offer you a free
consultancy service to
evaluate your needs and
provide a solution to any
situation you may have.
Our extensive range offers
solutions across multiple
industries. We welcome the
opportunity to demonstrate
our products to you.
We also have a contract
manufacturing service where
our qualified chemists can
formulate a product based
on your individual needs.
We also use energy saving
and low impact chemicals
and coatings within our
corporate environment and
manufacturing processes
wherever possible.
When comparing the cost of
our products, compare the
concentration of the active
ingredients. We guarantee
our products to be more
economical than any of our
competitors.
We also offer a free
comparison service to
evaluate your current
chemical usage and offer a
more economical solution
using the same or superior
products.
Great attention has been
paid to the labelling of
our products to offer safe
user directions. M.S.D.S.’s
(Material Safety Data
Sheets) for all products
are readily available on the
Cyndan website for easy
access to safe storage and
user information.
Contact us to arrange for one of our consultants or technical staff to discuss
your requirements, 1800 812 309 or [email protected]
Unit 1, 1 Prosperity Parade
NSW 2102 AUSTRALIA
Ph: +61 2 9998 5688
Fax: +61 2 9999 2086
1800 812 309
www.cyndan.com.au
economy