www.marshalls.co.uk/kerb
Sales Office: 0845 3020600
Technical Support: 08704 113344
Manufacturing Standards: see page 19
KERB07
Q10 10
Q10 110
Q10 112
Q10 150
Q10 510
Paving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 22
Block Paving . . . . . . . . . . . . . . . . . . . . . . page 76
Machine Lay . . . . . . . . . . . . . . . . . . . . page 114
Water Management . . . . . . . . . page 136
Kerb, Channel & Edging . . . . page 212
Traffic Management . . . . . . . . . page 250
Walling & Masonry . . . . . . . . . . . page 342
Standard Kerb, Channel and Edging
BS Standard Concrete Kerb, Channel and Edging
n Marshalls uses hydraulic pressing in the manufacture of standard natural kerb*,
channel and edging.
n Provides consistent long-term performance as expected from Marshalls with a
functional unit of this type.
n All units are manufactured in accordance with BS EN 1340:2003 Concrete kerb
units – requirements and test methods, together with a range of non-standard
sizes manufactured to the same specification offering greater flexibility in design.
n All straight units are 914mm unless otherwise stated.
n Marshalls recommends the use of appropriate handling equipment in the
installation of these products, and that installers work in accordance with
current health and safety legislation. For further information contact Marshalls
Technical Support on 0870 113344.
*Some radius unit are manufactured in a wet cast production method.
British Standard Products
For easy identification, BS EN 1340:2003 sections are tinted thus
Weights
The approximate number of units per tonne is indicated in each
section thus 20 = 20 units per tonne.
‹ Saxon Paving, Priora and Standard Kerb, The Green Building, Thorpe Park, Leeds
239
Half Battered
STRAIGHT
150 x 305 HB1 Ref No. RK0100000
125 x 255 HB2 Ref No. RK0300000
(also available in 600mm lengths)
125 x 150 HB3 Ref No. RK0500000
(97kg) 10
(69kg) 14
(42kg) 24
RADIUS
Convex (external)
Formula
Concave (internal)
HALF BATTERED RADIUS KERB
Note: ¼ circles can be constructed without cutting from units with a face length of 780mm. Units listed below are 780mm face length unless otherwise stated.
For radii greater than 12m straights should be utilised.
Type
Size
Profile
External Rad
150 x 305
HB1
125 x 255
HB2
Radius
0.6
No. per
1
1/4 Circle*
1
2
2
4
3
6
4
8
RK0105200
RK0105300
RK0105400
5
10
6
12
8
16
10
20
RK0105600
RK0105800
RK0106000
Weight
kg (approx)
84.9
RK0305060 RK0305100 RK0305200 RK0305300 RK0305400 RK0305500 RK0305600 RK0305800 RK0306000 RK0306200 62.0
125 x 150
HB3
Internal Rad
125 x 255
HB2
External Rad
125 x 255/150 HB to BN (LH)
RK4307400
RK4307600 RK4307800
52.5
Drop Kerb
125 x 255/150 HB to BN (RH)
RK4305400
RK4305600 RK4305800
52.5
XXXXXXXXX
= 950 face length
RK0505300
RK0307100
XXXXXXXXX
914mm face length
RK0505400
RK0505500
RK0505600
RK0505800
RK0506000
34
RK0307300 RK0307400 RK0307500 RK0307600 RK0307800 RK0308000 RK0308200 62.0
XXXXXXXXX
BS EN 1340
Half Battered Radius Kerb with reference numbers indicated in bold black are available ex-stock.
Half Battered Radius Kerb with reference numbers indicated in light black are manufactured to order. Contact our Sales Office to discuss your requirements.
*Except droppers.
†Achieved using a 10m radius kerb. Standard design layout details available through Technical Advisory services.
240
12†
24
DROP KERBS 1:12 GRADIENT
1:9 GRADIENT
125 x 255/178 Left hand Ref No. RK4330010
125 x 255/178 Right hand Ref No. RK4330020
125 x 178 Centre Ref No. RK4340000
125 x 255/150 Left hand DL1 Ref No. RK4300010
125 x 255/150 Right hand DR1 Ref No. RK4300020
(59kg) 17
(49kg) 20
(59kg) 17
TRANSITIONS
SIDE OFFLET
125 x 255 HB to BN Left hand Ref No. RK5050010
125 x 255 BN to HB Right hand Ref No. RK5050020
125 x 255 HB to 45º SP Left hand TL Ref No. RK5070010
125 x 255 45º SP to HB Right hand TR Ref No. RK5070020
(69kg) 14
For use with 125 x 255 HB Ref No. RK5300000
(69kg) 14
(62kg) 16
DOUBLE DROP KERB 1:24 GRADIENT
125 x 255/215 HB Left hand
Ref No. RK4320010
125 x 255/215 HB Right hand
Ref No. RK4320020
125 x 215/178 Left hand
Ref No. RK4320030
125 x 215/178 Right hand
Ref No. RK4320040
(54kg) 19
(63kg) 16
ANGLES
QUADRANTS
External
125 x 255 HBXA Ref No. RK5100000
Internal
125 x 255 HBIA Ref No. RK5100100
305 x 255 QHB Ref No. RK4720000
455 x 255 QHB Ref No. RK4710000
(36kg) 28
(36kg) 28
(43kg) 23
(99kg) 10
241
Bullnosed
STRAIGHT
150 x 305 BN Ref No. RK0150000
125 x 255 BN Ref No. RK0350000
Also available in 600mm length
125 x 150 BN Ref No. RK0550000
(100kg) 10
(70kg) 14
(42kg) 24
RADIUS
Convex (external)
Formula
Concave (internal)
Note: ¼ circles can be constructed without cutting from units with a face length of 780mm. Units listed below are 780mm face length unless otherwise stated.
For radii greater than 12m straights should be utilised.
Description
Size
Profile
Ext Rad Kerb
150 x 305
BN
125 x 255
BN
125 x 150
BN
125 x 255
BN
125 x 150
BN
Int Rad Kerb
XXXXXXXXX
Radius
0.6
No. per
1
1/4 Circle*
1
2
2
4
3
6
4
8
RK0155200
RK0155300
RK0155400
5
10
6
12
8
16
10
20
RK0155600
RK0155800
RK0156000
Weight
kg approx
87.2
RK0355100 RK0355200 RK0355300 RK0355400 RK0355500 RK0355600 RK0355800 RK0356000 RK0356200 64.0
RK0555200 RK0555300 RK0555400 RK0555500 RK0555600 RK0555800 RK0556000
RK0357600
BS EN 1340
*Except droppers.
†Achieved using a 10m radius kerb. Standard design layout details available through Technical Advisory services.
35.5
RK0358000 RK0358200 64.0
RK0557300 RK0557400 RK0557500 RK0557600 RK0557800 RK0558000
Bullnosed Kerb with reference numbers indicated in bold black are available ex-stock.
Bullnosed Kerb with reference numbers indicated in light black are manufactured to order. Contact our Sales Office to discuss your requirements.
242
12†
24
53.0
DROP KERBS
125 x 255/150 Left hand Ref No. RK4350010
125 x 255/150 Right hand Ref No. RK4350020
125 x 150 Centre Ref No. RK0550000
(59kg) 17
(42kg) 24
TRANSITION
125 x 255 HB to BN Left hand Ref No. RK4300010
125 x 255 BN to HB Right hand Ref No. RK4300020
(69kg) 14
ANGLES
QUADRANTS
Convex (external)
125 x 255 BNXA Ref No. RK5150000
Concave (internal)
125 x 255 BNIA Ref No. RK5150100
305 x 255 QBN Ref No. RK4820000
455 x 255 QBN Ref No. RK4810000
(37kg) 27
(37kg) 27
(45kg) 22
(99kg) 10
243
45° Splayed
STRAIGHT
125 x 255 SP Ref No. RK0400000
Also available in 600mm length
125 x 150 SP Ref No. RK0600000
(64kg) 16
(36kg) 24
RADIUS
125 x 255 SP Convex (external)
Radius
(mm)
1
2
3
4
5
6
8
10
12†
No. per metre*
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.09
No. per 1/4 circle
2
4
6
8
10
12
16
20
21
Weight (kg) approx
53
53
53
53
53
53
53
53
62.5
Reference No.
RK0405100
RK0405200
RK0405300
RK0405400
RK0405500
RK0405600
RK0405800
RK0406000
RK0406200
*Assumes inclusion of trowel width joint.
†Achieved using a 10m radius kerb. Standard design layout details available through Technical Advisory services.
45° Splayed Kerb with reference numbers indicated in light black are manufactured to order. Contact our Sales Office to discuss your requirements.
DROP KERB
125 x 255/150 Left hand DL2 Ref No. RK4400010
125 x 255/150 Right hand DR2 Ref No. RK4400020
125 x 150 Centre Ref No. RK0550000
(52kg) 19
(42kg) 24
TRANSITION
SIDE OFFLET
o
244
125 x 255 Left hand (HB to 45 SP) TL Ref No. RK5070510
o
125 x 255 Right hand (45 SP to HB) TR Ref No. RK5070520
For use with 125 x 255 SP Ref No. RK5320000
(69kg) 14
(62kg) 16
45° Splayed
QUADRANTS
455 x 255 QSP Ref No. RK4910000
305 x 255 QSP Ref No. RK4920000
(101kg) 24
(41kg) 10
External 125 x 255 SPXA
Ref No. RK5200000
Internal 125 x 255 SPIA
Ref No. RK5200100
(36kg) 28
(36kg) 28
ANGLES
245