SP CONCARE PVT.LTD. AN ISO 9001-2008 COMPANY RIPSTAR 111 + RIPSTAR 112 RIPSTAR 111 is a modified solvent less epoxy resin which in combination with RIPSTAR 112 cures into hard mass. Uses: Sealing of medium sized dry & wet cracks Repairs of concrete Pavements Bonding of old to new concrete Preparing Epoxy Resin based mortar for spillway Repairs of dams For Grouting application in wet & dry condition Advantages: Good flexibility of cured mass Good mechanical properties Low exotherm & long pot life Excellent adhesion under wet & dry condition Ability to cure in moist condition Low toxic effects Typical Properties: Properties RIPSTAR 111 RIPSTAR 112 Colour & Appearance Density at 250C Pale brownish Yellow clear Brownish yellow clear to slight hazy 1.1 ± 0.01 at 25°C Kg./Lit 0.98 ± 0.01 at 25°C Kg./Lit Viscosity at 250C Epoxy equivalent Amine Value 600 – 800 mPa.s 10,000 - 30,000 mPa.s 220 – 240 ----- ----- 350 – 400 Flash point >100 DIN 51584 (open cup) >100 DIN 51584 (open cup) Our Product Rang ADDMIX DUROCON JONTSIL RIPSTAR SPLANDEK SMARTSIL 4805,’Varad Plaza’ Chintamani Nagar, Madhavnagar Road, SANGLI- 416 416, Telefax : 91 233 2313197, E-mail: [email protected], Web:- www.spconcare.com SP CONCARE PVT.LTD. AN ISO 9001-2008 COMPANY Mixing Proportion & Processing: 1. 2. 3. For Dry Cracks RIPSTAR 111 - 100 Parts by weight RIPSTAR 112 - 50 Parts by weight Viscosity Agent - 10 Parts by weight (if required to reduce viscosity) For wet cracks RIPSTAR 111 - 100 Parts by weight RIPSTAR 112 - 50 Parts by weight Accelerator - 5 Parts by weight For Mortar RIPSTAR 111 - 100 Parts by weight RIPSTAR 112 - 50 Parts by weight Silica Sand (M - 10) - 850 Parts by weight Packaging: RIPSTAR 111 + RIPSTAR 112 are supplied in 1 Kg, 5 Kg, 20 Kg, & 210 Kg. packs. Properties after Mixing: Initial viscosity of mix at 25°C 1200 cps Pot life at 25°C 80 – 120 Minutes Properties after Curing (after 7 days): Flexural strength 88 MPa Compressive strength 65 MPa Tensile strength 43 MPa Density at 25°C 1.11 Kg./Lit. Hardness 75 Shore D Recommended Curing Schedule: 30°C - 20 TO 24 Hours Storage and Shelf life All: Store under cover, out of direct sunlight and protect from extremes of temperature. In tropical climates the product must be stored in an air-conditioned environment. Shelf life is 12 months when stored as above. Our Product Rang ADDMIX DUROCON JONTSIL RIPSTAR SPLANDEK SMARTSIL 4805,’Varad Plaza’ Chintamani Nagar, Madhavnagar Road, SANGLI- 416 416, Telefax : 91 233 2313197, E-mail: [email protected], Web:- www.spconcare.com SP CONCARE PVT.LTD. AN ISO 9001-2008 COMPANY Safety precautions: As with all chemical products, care should be taken during use and storage to avoid contact with eyes, mouth, skin and foodstuffs (which can also be tainted with vapour until product fully cured or dried). Treat splashes to eyes and skin immediately. If accidentally ingested, seek immediate medical attention. Keep away from children and animals. Reseal containers after use. Do not reuse containers for storage of consumable item. Disclaimer: Whilst any information contained herein is true, accurate and represents our best knowledge and experience, no warranty is given or implied with any recommendations made by us, our representatives or distributors, as the conditions of use and the competence of any labour involved in the application are beyond our control. Our Product Rang ADDMIX DUROCON JONTSIL RIPSTAR SPLANDEK SMARTSIL 4805,’Varad Plaza’ Chintamani Nagar, Madhavnagar Road, SANGLI- 416 416, Telefax : 91 233 2313197, E-mail: [email protected], Web:- www.spconcare.com
© Copyright 2026 Paperzz