SPECIALTY MATERIALS
For Dental Applications
ORGANIC AND POLYMER MATERIALS
For Dental Applications
Dental applications require high-quality materials that are
biocompatible, wear-resistant and durable. Restorative dental
materials must withstand the adverse conditions of the oral
environment for optimal performance. The selection of monomers,
initiators, crosslinkers, ionomers and additives impacts longevity,
mechanical characteristics and ultimately the performance of the
end product. The quality of dental materials is highly dependent
on the monomers and starting materials used in their polymerization
and formulation.
Sigma-Aldrich® offers a selection of high-purity monomers and
starting materials for a wide range of dental applications.
Our dedication and innovation assist your development pipeline to
meet clinical and technological expectations. We are dedicated to
customizing our services around your needs.
CAS No.
Material Name
Description
CAS No.
Material Name
Description
64401-02-1
3290-92-4
Bisphenol A ethoxylate diacrylate
Trimethylolpropane trimethacrylate
(TMPTMA)
Crosslinker; resin
Crosslinker; resin
Monomers
868-77-9
2-Hydroxyethyl methacrylate (HEMA)
Monomer
72869-86-4
Diurethane dimethacrylate (udma)
(bis (2-methacryloxyethyl) N, N’-1,
9-nonylene biscarbamate)
Monomer
109-16-0
Triethylene glycol dimethacrylate
(TEGDMA)
Monomer
2867-47-2
2-(Dimethylamino) ethyl methacrylate
Monomer
7534-94-3
Isobornyl methacrylate
Monomer
80-62-6
Methyl methacrylate
Monomer;
adhesive promoter
2530-85-0
3-(Trimethoxysilyl) propyl methacrylate
Monomer;
adhesive promoter
13688-56-7
(Trimethylsilyl) methacrylate
Monomer;
adhesive promoter
17096-07-0
3-(Tris (trimethylsiloxy) silyl) propyl
methacrylate
Monomer;
adhesive promoter
17407-09-9
2-(Trimethylsilyloxy) ethyl methacrylate
Monomer;
adhesive promoter
32435-46-4
Bis (2-(methacryloyloxy) ethyl) phosphate Monomer; self etch
24599-21-1
Ethylene glycol methacrylate phosphate
Monomer; self etch
Crosslinkers and Resins
97-90-5
Ethylene glycol dimethacrylate (EGDM)
Crosslinker
125086-31-9 Biphenyl dimethacrylate (BPDM)
Crosslinker
3253-39-2
Bisphenol A dimethacrylate (BisDMA)
Crosslinker
6606-59-3
1, 6-Hexanediol dimethacrylate (HDMA)
Crosslinker
109-17-1
Tetraethylene glycol dimethacrylate
Crosslinker
1565-94-2
Bisphenol A glycerolate dimethacrylate
Crosslinker; resin
4687-94-9
Bisphenol A glycerolate diacrylate
Crosslinker; resin
1830-78-0
Glycerol 1, 3-dimethacrylate (GDMA)
Crosslinker; resin
26570-48-9
Polyethylene glycol diacrylates
Crosslinker; resin
60506-81-2
Dipentaerythritol penta-hexa-acrylate
Crosslinker; resin
41637-38-1
Ethoxylated bisphenol methacrylate
(EBPADMA)
Crosslinker; resin
2
For more information or technical support, contact our Product
Management team at [email protected].
Ionomers
9003-01-4
Polyacrylic acid
Impression Materials
9016-00-6
Poly (dimethylsiloxane)
68083-19-2 Vinyl-polydimethylsiloxane
68037-59-2 Poly (dimethylsiloxane-co-methylhydrosiloxane) trimethylsilyl terminated
58109-40-3 Diphenyliodonium
hexafluorophosphate
1483-72-3
Diphenyliodonium chloride
10373-78-1 Dl-camphorquinone
75980-60-8 Diphenyl (2, 4, 6-trimethylbenzoyl)
phosphine oxide
94-36-0
Benzoyl peroxide
3077-12-1
2, 2'-(4-Methylphenylimino)
diethanol
121-72-2
N, N-Dimethyl-m-toluidine
50438-75-0 2-(4-(Dimethylamino) phenyl) ethanol
17078-28-3 4-(Dimethylamino) phenylacetic acid
150-76-5
4-Methoxyphenol
128-37-0
68478-92-2
Ionomer
Impression material
Impression material
Impression material
Photo initiator
Photo initiator
Photo initiator
Photo initiator
Thermal initator
Co-initiator
Co-initiator
Co-initiator
Co-initiator
Inhibitor
Inhibitor
Catalyst;
hydrosilylation
603-35-0
2, 6-Di-tert-butyl-4-methylphenol
Platinum (0)-1, 3-divinyl-1, 1, 3,
3-tetramethyldisiloxane
complex solution
Triphenylphosphine
Precursors
760-93-0
Methacrylic anhydride
Precursor
920-46-7
Methacryloyl chloride
Precursor
79-10-7
Acrylic acid
Precursor
79-41-4
Methacrylic acid
Precursor
Specialty Materials: For Dental Applications
Photo initiator;
precursor
INORGANIC MATERIALS
For Dental Applications
The biocompatibility and chemical inertness of several inorganic
materials make them useful for dental applications ranging from crowns,
caps and cements to additives, elastomers and restorative materials.
Variations in the inorganic constituents allow tunability of optical and
mechanical properties rendering them viable materials for dentistry.
Sigma-Aldrich offers a large selection of well characterized salts,
ceramics, oxides and nanopowders having a wide range of dental
applications. We are also able to provide custom formulations
according to our customers’ specific needs.
Metal Salts
Cat. No.
Material Name
Description
289396
289833
344915
338893
250171
325945
401498
238007
298166
205133
Hydroxyapatite, powder
Strontium carbonate, ≥98%
Aluminum metaphosphate
Lithium phosphate
Sodium hexafluorosilicate
Terbium(III) nitrate pentahydrate, 99.9% trace metal basis
Zinc hexafluorosilicate hydrate, 99%
Potassium hexafluoroantimonate, 99%
Erbium(III) nitrate pentahydrate, 99.9% trace metal basis
Praseodymium(III) nitrate hexahydrate, 99.9% trace metal basis
Material for dental cements
Material for dental cements
Dental cement material
Filling material
Additive to dental cement
Additive to dental restorative materials
Additive to dental cement
Additive to dental cement
Additive to dental restorative materials
Additive to dental restorative materials
For complete list of salts, visit aldrich.com/metalsalts
Oxides and Ceramics
Cat. No.
Material Name
Description
L4000
202606
95381
203114
255750
232785
230693
255475
308382
383309
Lanthanum oxide
Aluminum oxide, 99.998% trace metal basis
Bismuth(III) oxide, ≥98.0%
Cobalt(II, III) oxide, 99.995% trace metal basis
Zinc oxide, 99.99% trace metal basis
Tungsten(VI) oxide, ≥99% trace metal basis
Zirconium(IV) oxide, 99% trace metal basis
Boron nitride, 98%
Potassium hexafluorotitanate
Barium zirconate
Precursor for restorative materials
Precursor for restorative materials
Dental cement material
Pigment additive to restorative materials
Dental cement material
Precursor for restorative materials
Precursor for restorative materials
Dental cement material
Additive for filling material
Filling material
For complete list of oxides, visit aldrich.com/oxides
For complete list of ceramics, visit aldrich.com/elementalceramics
Nanopowders
Cat. No.
Material Name
Description
677418
544884
634271
544906
693871
634298
637017
Hydroxyapatite, <200 nm, ≥97%
Iron(III) oxide nanopowder, <50 nm
Lanthanum(III) oxide, nanopowder, <100 nm, 99% trace metal basis
Zinc oxide, nanopowder, <100 nm
Calcium phosphate, amorphous, <150 nm
Europium(III) oxide, nanopowder, <150 nm, 99.5% trace metal basis
Bismuth(III) oxide, nanopowder, 90 – 210 nm, 99.8% trace metal basis
Material for dental cements
Filling material
Precursor for restorative materials
Dental cement material
Dental cement material
Filling material
Dental cement material
For complete list of nanomaterials, visit aldrich.com/nanopowders
For more information, visit sigma-aldrich.com
3
Additional Products for Dental Applications
Material Name
Adhesives / Bonding
Sodium Carboxymethylcellulose
Sodium Tetraphenylborate
Cements
Aluminum Phosphate
Calcium Chloride Dihydrate
CAS No.
9004-32-4
143-66-8
7784-30-7
10035-04-8
Available Grades
Meets USP testing specifications
Meets analytical specification of Ph.
Eur., USP, FCC, E509
Calcium Fluoride
Calcium Hydroxide
Calcium Oxide
Magnesium Oxide
7789-75-5
1305-62-0
1305-78-8
1309-48-4
Maleic Acid
Phosphorus Pentoxide
Silica Gel
Zinc Acetate Dihydrate
Zinc Oxide
110-16-7
1314-56-3
112926-00-8
5970-45-6
1314-13-2
Meets analytical specification of Ph.
Eur., BP, USP
Composites
Dimethylglyoxime
Ceramics / Implants
Boron Trioxide/ Boric Anhydride
Iron(III) Nitrate Nonahydrate
Titanium Dioxide
Impressions
Agar
Calcium Sulfate Dihydrate
Drierite
Glycolic Acid
Magnesium Carbonate
Potassium Sulfate
Meets analytical specification of FCC
Meets analytical specification of Ph.
Eur., BP, USP, FCC, E 530
95-45-4
1303-86-2
7782-61-8
13463-67-7
9002-18-0
10101-41-4
7778-18-9
79-14-1
23389-33-5
7778-80-5
Endodontics
Ethylenediaminetetraacetic Acid 60-00-4
Ethylenediaminetetraacetic acid 6381-92-6
disodium salt dehydrate
Sodium Hypochlorite Solution 7681-52-9
PharmaGrade, EP, Manufactured
under appropriate GMP controls
for pharma or biopharmaceutical
production
Material Name
CAS No.
111-30-8
7647-01-0
7697-37-2
7664-38-2
Sulfuric Acid
7664-93-9
Enabling Science to
Improve the Quality of Life
CAS No.
107-88-0
78-93-3
67-64-1
Chloroform
Dichloromethane
67-66-3
75-09-2
Dimethyl Sulfoxide
67-68-5
Ethanol
Ethyl Acetate
64-17-5
141-78-6
Ethylene Glycol
Heptane
Hexane
Isopropyl Alcohol
107-21-1
142-82-5
110-54-3
67-63-0
Methanol
Specially Denatured Alcohol
tert-Butanol
Tetrahydrofuran
Toluene
Miscellaneous (Multiple uses)
Acetic Acid
67-56-1
64-17-5
75-65-0
109-99-9
108-88-3
Agarose
Benzoyl Peroxide
Calcium Hydroxide
Glycerin
9012-36-6
94-36-0
1305-62-0
56-81-5
64-19-7
Hydrogen Peroxide
7722-84-1
Magnesium Sulfate Heptahydrate 10034-99-8
Meets analytical specification of Ph.
Eur., BP, USP, FCC
Etchants, Solvents and other Essential Products
Etchants
Glutaraldehyde
Hydrochloric Acid
Nitric Acid
Phosphoric Acid
Material Name
Solvents
(±)-1,3-Butanediol
2-Butanone
Acetone
Available Grades
Meets analytical specification of Ph.
Eur., BP, NF, FCC
Phosphate Buffered Saline
Poly(ethylene glycol)
Potassium tartrate dibasic
hemihydrate
Silicon Dioxide
Sodium Acetate Trihydrate
—
25322-68-3
6100-19-2
Sodium Deoxycholate
302-95-4
Sodium Sulfate
7757-82-6
Trizma Base
Water
77-86-1
7732-18-5
7631-86-9
6131-90-4
Available Grades
FCC, Food Grade
Meets analytical specification of Ph.
Eur., BP, NF; FCC
Meets analytical specification of Ph.
Eur., NF
Meets EP testing specifications, meets
USP testing specifications; meets EP,
USP testing specifications; Food Grade
Meets USP testing specifications
Meets analytical specification of Ph.
Eur., BP, NF; FCC
FCC, Food Grade; meets USP testing
specifications
Meets analytical specification of Ph. Eur.,
BP, USP, FCC; FCC, FG; PharmaGrade,
USP, JP, Ph Eur, Manufactured under
appropriate GMP controls for pharma
or biopharmaceutical production
Meets USP testing specifications;
meets analytical specification of Ph.
Eur., BP, USP, FCC, E422; FCC, FG, Kosher
Meets USP testing specifications
PharmaGrade, USP, Manufactured
under appropriate GMP controls
for pharma or biopharmaceutical
production; meets analytical specification of Ph. Eur., BP,USP, FCC
Meets USP testing specifications;
meets analytical specification of Ph.
Eur., BP, USP, FCC, E262
PharmaGrade, Manufactured
under appropriate controls for
use as a raw material in pharma or
biopharmaceutical production
Meets analytical specification of Ph.
Eur., BP, USP
Meets EP, USP testing specifications
Order/Customer Service: sigma-aldrich.com/order
Technical Service: sigma-aldrich.com/techservice
Development/Custom Manufacturing Inquiries
[email protected]
Safety-related Information: sigma-aldrich.com/safetycenter
©2015 Sigma-Aldrich Co. LLC. All rights reserved. SIGMA-ALDRICH, SAFC and ALDRICH are trademarks of Sigma-Aldrich Co. LLC, registered in the US and other countries. Sigma-Aldrich, Aldrich and SAFC brand products
are sold by affiliated Sigma-Aldrich distributors. Purchaser must determine the suitability of the product(s) for their particular use. Additional terms and conditions may apply. Please see product information on the
Sigma-Aldrich website at www.sigmaaldrich.com and/or on the reverse side of the invoice or packing slip.
World Headquarters
3050 Spruce St.
St. Louis, MO 63103
(314) 771-5765
sigma-aldrich.com
RSF
83767
1065